Bow Stern
Safe Speed and Boat Handling Skills
The Navigational Rules of the Road (Rule 6) states that you to the need to set a safe speed in all conditions of visibility. This obviously does not mean the same “safe speed” applies in good as well as restricted visibility. The first requirement of this rule is to consider what the state of visibility is because safe speed in any condition must be closely related to the immediate circumstances and conditions at hand. A boat at high speed has a large amount of force. With an untrained operator, this force can be dangerous.
The following different factors should be considered to determine safe speed:
Heavy seas: Slow down as winds and seas increase; the boat will handle more easily. Pounding or becoming airborne fatigues the hull and could injure your crew or cause them chronic body aches and pains.
Traffic density: Do not use high speed in high traffic density areas. A safe speed allows response to developing situations and minimizes risk of collision, not only with the nearest approaching vessel, but with others around it.
Visibility: If conditions make it difficult to see, slow down. Fog, rain, and snow are obvious limits to visibility, but there are others. Visible features and obstructions (river bends, piers, bridges and causeways), along with heavy vessel traffic, can limit the view of “the big picture.” Darkness or steering directly into the sun lessens ability to see objects or judge distances. Prevent spray on the windscreen (particularly salt spray or freezing spray) as much as possible and clean it regularly. Spray build-up on the windscreen is particularly hazardous in darkness or when you experience glare.
Besides Heavy Seas, Traffic Density, and Visibility there are additional external factors that will have an effect your vessels ability of running at a safe speed.
In shallow water, the bottom has an effect on the movement of the vessel. Slow down in shallow water. In extremely shallow water, the vessel’s stern tends to “squat” and actually moves closer to the bottom.
In narrow channels and canals, a vessel moving through the water will cause the “wedge” of water between the bow and the nearer bank to build up higher than on the other side. This bank cushion tends to push the bow away from the edge of the channel.
As the stern moves along, screw suction and the movement of water to “fill-in” where the boat was creates bank suction. This causes the stern to move towards the bank. The combined effect of momentary bank cushion and bank suction may cause a sudden shear toward the opposite bank. Bank cushion and bank suction are strongest when the bank of a channel is steep. They are weakest when the edge of the channel shoals gradually and extends in a large shallow area. When possible, it is best to operate your vessel in the center of an extremely narrow channel to avoid these forces. Slower speed also reduces the amount of cushion and suction. Some rudder offset towards the closer bank will help to avoid continuous cushion and suction effects by.
When meeting another vessel close aboard, bow cushion and stern suction occur between the vessels much the same as bank cushion and suction. Helm corrections should be used to compensate. As both vessels move through the water, the combined effect is greater than what a single vessel encounters from bank interaction. Caution should be used so the bow does not veer too far from the intended track and the stern swings into the path of the other vessel.
Before vessels are bow-to-bow, a small amount of right rudder should be used to ensure the bow is clear. The bow cushion will increase separation. As the vessels near bow-to-beam, using left rudder will enable the vessel to keep away from the right-hand bank and to stay parallel to the channel. When the vessels are bow-to-quarter, the bow cushion will be offset by the stern suction, and bank cushion may need to be offset by some right rudder. Finally, as the vessels are quarter-to-quarter, stern suction will predominate, and will require left rudder to keep the sterns apart.
When meeting another vessel in a narrow channel or operating near a bank the following bow cushion and stern suction considerations apply:
- The deeper your vessel’s draft, the greater the cushion and suction effect, particularly if your boats draft is nearly the same as the depth of the waters you are operating in.
- The closer to a bank or another vessel, the greater the cushion and suction will affect your boat.
- In very narrow waterways, slow down to decrease cushion and suction effects, but not slow your vessel to the point of losing your ability to maintain bare steerage.
When meeting another vessel in a narrow channel, the bow cushion and stern suction effects caused by the other vessel should be balanced with the bank cushion and suction effects due to the channel.
As your boat moves forward a combination of bow and stern waves move outward at an angle to the vessel track. The wake height and speed depend on vessel speed and hull type. Relatively large, semi-displacement hulls, proceeding at cruising speed, cause some of the largest wakes. Some lighter craft actually create a smaller wake at top speed while operating in the planing mode rather than at a slower speed. Displacement boats make the largest wake at hull speed. As the helmsperson you should learn how to operate your boat so that it leaves the least wake possible when operating in close quarters or around small vessels. This may require slowing your vessel appreciably to ensure safe operation.
All vessels are responsible for their wake and any injury or damage it might cause. Only a poorly trained or ignorant boat operator trails a large wake through a mooring area or shallows, tossing vessels and straining moorings. A large, unnecessary wake, particularly in enclosed waters or near other smaller vessels, is unnecessary and can cause damage or injure others.
About the Author
Captain Bob Figular, President and Founder of Mariners Learning System is an avid Boater and Sailor who has cruised the world chasing his dreams.
How To: Tie-Down Bow & Stern
|
|
Boating from Bow to Stern … |
|
|
Boating from Bow to Stern: Everything About Boating – By Sails, Oars, or Engine – For the Beginning Yachtsman … |
|
|
Notes on the Crooked – Bow and Crooked – Stern Junks of Szechwan … |
|
|
President Bow Stern American Warship Old Print 1902 $16.75 Old Antique Historical Victorian Prints Maps and Historic Fine Art ———-. President Bow Stern American Warship Old Print 1902 Page From An Issue Of 1902 . Wood Engravings From . The Graphic . Would Make An Ideal Gift . The Actual Date Is Printed On Each Page . This Print Is Over 100 Years Old. And Is Not A Modern Copy. There Is A Fold Which Sometimes Shows As A Shadow On The Image, This Will … |
|
|
1902 BOWS PRESIDENT SHIP STERN AMERICAN WARSHIP MELLINS $20.75 A full page from the GRAPHIC, an illustrated weekly newspaper dated 1902, the scan size is approximately 15.5 x 11 inches (395×280). All are genuine antique prints and not modern copies the Graphic is an illustrated newspaper and is a fine example of a historic social record of British and world events up to the present day. The Graphic is known for its coverage of the following subjects the wars,… |
|
|
James River,Va. Deck,turret of U.S.S. Monitor seen from the bow (i.e. stern) $8.99 8x12in Print from a high-quality scan of the original.Title: [James River, Va. Deck and turret of U.S.S. Monitor seen from the bow (i.e. stern)] Creator(s): Gibson, James F., b. 1828, photographer Date Created/Published: 1862 July 9. Summary: Photographs of the Federal Navy, and seaborne expeditions against the Atlantic Coast of the Confederacy — the Federal Navy, 1861-1865. Notes: Stereo filed i… |
|
|
… |
|
|
Yakima Ratcheting Bow/Stern Kayak Tie Down Straps Ratcheting Bow/Stern Kayak Tie Down Straps – Here’s a handy rule of thumb: if your boat extends beyond the windshield, secure it with bow/stern tie downs. Bow and stern tie downs are essential to stabilize boats against the hurricane-force winds created while traveling at highway speeds. These easy to use ratchet-pulley tie downs attach to your boats’ bow/stern grab loops and your car’s tow hooks,… |
|
|
Attwood LED 2-Mile Deck Mount Navigation Bow Light, Stainless Steel $35.90 LED stainless steel 2 mile deck mount navigation bow light… |
|
|
… |
|
|
1 Pair of BLUE Universal Kayak J Racks Car Top Carriers $69.99 The preferred, efficient method of transporting your Kayaks at a very affordable price!This standard design is universal and will mount to almost any load bar or luggage rack on vehicles today.It’s designed to transport kayaks on their side, saving space and allowing you to transport 2 kayaks on one vehicle. (Kayak not included)Please view the enclosed pictures to see how they can be mounted on various vehicles and how easy they are to use. Come with 2 different sets of bottom mounting plates one curved and one straight (flat), depending on your need.Due to it’s efficient design you will still have plenty of room on your vehicle racks to hold other things.All mounting hardware is provided including the quick adjust hull tie down straps, and the bow/stern tie down ropes for added transportation safety.Our racks will easily fit most factory and after market round, square, oval, or flat luggage racks and load bars(1 Set of Racks holds 1 Kayak) |
|
|
1 Pair of YELLOW Universal Kayak J Racks Car Top Carriers $69.99 The preferred, efficient method of transporting your Kayaks at a very affordable price!This standard design is universal and will mount to almost any load bar or luggage rack on vehicles today.It’s designed to transport kayaks on their side, saving space and allowing you to transport 2 kayaks on one vehicle. (Kayak not included)Please view the enclosed pictures to see how they can be mounted on various vehicles and how easy they are to use. Come with 2 different sets of bottom mounting plates one curved and one straight (flat), depending on your need.Due to it’s efficient design you will still have plenty of room on your vehicle racks to hold other things.All mounting hardware is provided including the quick adjust hull tie down straps, and the bow/stern tie down ropes for added transportation safety.Our racks will easily fit most factory and after market round, square, oval, or flat luggage racks and load bars(1 Set of Racks holds 1 Kayak) |
|
|
10 ft. Long 1/4 Rope Tie-Down Pulley Ratchet $13.99 10 ft. long 1/4 Rope Tie-Down Pulley Ratchet designed for securing light cargo and equipment for storage and travel. Works great as a bow & stern tie-down strap for kayaks and canoes stored on a vehicle roof. Features a thumb lever for quick lock or release. Maximum 150 lb. break strength with a 50 lb. work load limit. Made with braided polypropylene rope and zinc plated steel hook ends. |
|
|
10 ft. Long 3/8 Rope Tie-Down Pulley Ratchet $16.99 10 ft. long 3/8 Rope Tie-Down Pulley Ratchet designed for securing cargo and equipment for storage and travel. Works great as a bow & stern tie-down strap for kayaks and canoes stored on a vehicle roof. Features a thumb lever for quick lock or release. Maximum 250 lb. break strength with an 83 lb. work load limit. Made with braided polypropylene rope and zinc plated steel hook ends. |